Home >Product >ABB

ABB 4943013-6 Battery for memory backup

  • Warranty: 365 days
  • Quality: Original module
  • Condition: New / Used
  • Warehouse: Spot
  • Delivery time: Shipped in 3 days after payment
  • Mailbox:panda@xiongbaindustrial.com

.Many products are not yet on the shelves please contact us for more products

.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation

.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible


ABB 4943013-6 Battery for memory backup

The ABB 4943013-6 is a memory backup battery used in ABB industrial control systems, such as AC 800M or Advant Controller series, to retain critical data (programs, configurations, and volatile memory) during power outages. Below are its key details:


Primary (non-rechargeable) Lithium-Thionyl Chloride (LI-SOCI2) 1/2 AA-sized single cell 3.6V, size 14.5 x 25 mm, Non-restricted Battery for memory backup for PM810, PM825, PM851, PM856, PM860,PM861, PM864, PM865 and PM866.


1. Specifications

  • Type: Lithium battery (non-rechargeable)

  • Voltage3.6V (typical for industrial PLC/controller backup)

  • Capacity: ~1.2 Ah (varies by usage conditions)

  • Lifespan: ~2–5 years (depends on temperature & power cycles)

  • Compatibility:

    • ABB AC 800M controllers (e.g., PM851, PM861).

    • Legacy Advant OCS systems.


2. Purpose & Function

  • Retains: Program logic, process parameters, and real-time clock (RTC) during power loss.

  • Prevents: Data corruption or loss when the controller is powered off or during brownouts.


3. Replacement Guide

When to Replace?

  • Low Battery Alarm: Most ABB controllers display a warning (e.g., via LED or software).

  • Date Code: Check the battery’s manufacturing date (typical shelf life: 5–10 years).

Steps to Replace:

  1. Power On: Replace the battery while the controller is powered to avoid memory loss.

  2. Locate Battery: Usually in the CPU module (e.g., slot near the RAM).

  3. Swap Batteries: Remove the old battery and insert the new one (observe polarity!).

  4. Verify: Check for errors in Control Builder M (ABB engineering tool).


4. Cross-Reference & Alternatives

  • OEM Part: ABB 4943013-6 (official replacement).

  • Equivalent Batteries:

    • Tadiran TL-5902/S (3.6V lithium, widely compatible).

    • EEMB ER14250 (3.6V, 1.2Ah).

  • Caution: Avoid using non-lithium batteries (voltage drop risks memory loss).


5. Troubleshooting

  • Memory Lost After Power Cycle?

    • Confirm battery voltage (>3.0V under load).

    • Check for corrosion on battery contacts.

  • Battery Not Recognized?

    • Verify compatibility with your ABB controller model.


6. Migration & Upgrades

  • Legacy Note: If upgrading to newer ABB controllers (e.g., AC 800M High Integrity), confirm battery requirements.

  • Backup Best Practices:

    • Regularly save programs to external storage (Control Builder M).

    • Use supercapacitors (in newer models) for longer backup life.




OTHERS ALSO LEARNED ABOUT THE FOLLOWING PRODUCTS:

ABB PM861AK01 3BSE018157R1 AC 800M CONTROLLER UNIT MODULE

ABB AC 800M PM864AK02 REDUNDANT PROCESSOR UNIT 3BSE018164R1 CPU MODULE

ABB PM856AK01 3BSE066490R1 AC 800M CONTROLLER

ABB PM866AK01 3BSE076939R1 PROCESSOR UNIT MODULE