.Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible
PU516A Engineering board with MB300 and Advant Station 100 Engineering Board - PCI Communication Modules ABB 3bse032402r1 industrial control circuit card.High quality performance completes the system task
The DC power supply is connected to the junction box tb1 of the system 57 through the DC input card.
The DC input card provides diode isolation to allow connection: two independent power supplies. Such as a mains Derived DC power supply and a battery backup DC power supply. Note that the current will be supplied from the highest voltage input, and in some cases the current will be shared between the two inputs. Each of the two inputs has double + 24V and 0V terminals for easy connection through power supply or parallel connection of input sources. The fused + 24V output is a combination of two DC inputs for powering auxiliary equipment.
Independent power supply control card
Note: in the control system with separate power supply, the DC connection is still the engineering card required to supply power to the DC input card.
If local or other regulations require separate connections to achieve the highest integrity of the distribution. The separate power supply of the single channel control card can be easily realized as follows:
(1) On the single channel control card, from position 1-2, and then re install to position 2-3, as follows: the individual power supply of the important control card must be blown externally through the 1A fuse
Note: link LK1 is not installed on the old version of single channel control card. In this case, the yellow disk fuse FS1 must be physically removed from the card.
(2) Connect the + 24V DC power supply to the corresponding field or relay interface card terminals 35 (+ 24V) and 36 (0V), as shown above.
AC to DC power unit connection warning
The AC to DC power supply unit must be grounded.
The input power supply of the AC to DC power supply unit may be:
a. 85V to 264v AC power supply with frequency of 47Hz to 440hz.
b. 110V to 340v DC power supply (see Zellweger analytics for information on DC power supply).
The power supply must be fused at the power supply for a maximum of 6A. At the switchboard. If other cables are used, the rated power supply must be at least 6A.
Two cables lead out from the rear of the AC to DC power supply unit:
a. AC input
AC power cable connection is color coded Brown live, blue neutral, yellow / Green grounded. If required, these conductors shall pass through appropriate intermediate trunk rated terminal blocks.
Main product ：
ABB PRODUCTS: Industrial robot spare parts DSQC series， Bailey INFI 90， IGCT， etc.， for example: 5SHY6545L0001 AC10272001R0101 5SXE10-0181，5SHY3545L0009，5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101， PM866， PM861K01， PM864， PM510V16， PPD512a10-15000 3BHE040375R1023， PPD113， PP836A， PP865A， PP877， PP881， PP885，GFD563A102 3BHE046836R0102 AC800PEC ，etc.，
GE PRODUCTS: spare parts such as modules， cards， and drivers. For example: VMIVME-7807， VMIVME-7750， WES532-111， UR6UH， SR469-P5-HI-A20， IS230SRTDH2A， IS220PPDAH1B， IS215UCVEH2A ， IC698CPE010，IS200SRTDH2ACB，etc.，
BENTLY NEVADA PRODUCTS:3500/3300/1900 system， Proximitor probe， etc.，for example: 3500/22M，3500/32， 3500/15， 3500/20，3500/42M，1900/27，etc.，
FOXBORO PRODUCTS: I/A series of systems， FBM sequence control， ladder logic control， incident recall processing， DAC， input/output signal processing， data communication and processing， such as FCP270 and FCP280，P0904HA，E69F-TI2-S，FBM230/P0926GU，FEM100/P0973CA，etc.，