.Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible
GE HYDRAN 201Ti | Mark IV | ONE Channel Controller Gas analyzer.It is Essential DGA monitoring for transformers，knowledge of their health condition is essential to having a reliable network. When a transformer’s insulation system is overstressed, gases are produced that dissolve in the oil. Dissolved Gas-in-oil Analysis (DGA) is recognized as the best indicator of developing faults.（Click for related products:HYDRANM2-X Hydran M2-X、Hydran M2 Mark III ）
CLICK TO OPEN THE HYDRAN 201Ti DATA SHEET OR DOWNLOAD:
hydran_201ti.pdf
Key features of the GE Hydran H201Ti include:
A 100% responsive composite gas sensor that is sensitive to hydrogen (general fault gas) and carbon dioxide (overheated paper).
An LCD display and standard RS-485 connection. It supports Modbus or Hydran protocols .
A vacuum gas extraction membrane and a system self-check and self-diagnosis feature
Local and remote alerts set at predetermined levels or rates. Remote viewing of gas readings and trends can be done via serial port communication
Easy installation on a single valve. There are no moving parts, no pumps, and no additional pipes are needed. It does not require on-site calibration.
The Hydran™ 201Ti is a small and easy to setup continuous Dissolved Gas-in-oil Analysis (DGA) monitor.
It provides the basic information used by IEEE® Standard C57.104 and can be used as an essential first
line of defence for the transformers in your fleet to obtain advance warning of a failure condition and
minimize the risk of an unplanned outage.
The 201Ti uses fuel cell technology (described as fixed instruments - method 3 in the standard) and is
now available with a choice of either the world renown “Hydran Composite Gas” sensor which responds
100% to Hydrogen and is also sensitive to Carbon Monoxide, Acetylene and Ethylene or the more basic
“Hydrogen Only” sensor which focuses purely on Hydrogen gas generation.
Because the monitoring unit mounts on a single valve and uses Dynamic Oil Sampling, there is no need
for a pump or extra piping to connect to different valves. Due to its uncomplicated features and the easily
understood information it provides, the 201Ti has been amongst the monitors of choice for many years,
with one of the largest installed base of any DGA monitor.
Related products：
Honeywell CC-PAOX01 Analog output Module 51405039-275
A-B 1756-L61 CPU Module Allen-Bradley 1756L61
VIBRO-METER 200-528-500-013 VM600 RPS6U SIM-275A Power Supply Module
ABB DSCA114 57510001-AA Master Communication Board