.Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible
ALSTOM | 42011-106-00 | A01 ITC_VIOM_VIOC VER.A01 | Industrial control circuit board.The ALSTOM 42011-106-00 is also known as an interface board module. Some of its features and functions include:
Programming mode: By default, all startup modes are set to false to allow customers to program the device. An error check has been added to ensure that the rated speed (when programming for a generator set) is less than the maximum speed.
Service mode: The minimum load hold has been changed to come from the breaker logic harvester input. The previous hold change command was selected under the "Speed Control Settings" header.
Speed setting ratio: The minimum adjustment range setting point rate for all speeds has been changed to 0.01 (from 0.1).
Auxiliary limiter or controller: Logic has been added to ensure auxiliary control in case of input failure. The Aux re-enable logic has also been changed. The circuit breaker disconnect logic has been changed to correct the generator disconnect auxiliary actuator output fault.
Auxiliary controller: The speed setpoint auxiliary bias logic has been changed to allow only when the speed setpoint reaches the maximum control value. Before this, the limiter could be controlled during extreme transient periods.
| ALSTOM | 42011-106-00 | A01 ITC_VIOM_VIOC VER.A01 | Industrial control circuit board |
| plc-module.com | XiongBa Industrial Control | Panda |